Eoptolink QSFP Active Optical Cable (AOC) EOLQ-8540G-PCT-XX and EOLQ-8540G-PCT-XX*-1 is a high performance integrated cable for short-range multi-lane data communication and interconnect applications. It integrates four data lanes in each direction with 40 Gbps aggregate bandwidth. Each lane can operate at 10 Gbps with lengths ranging from one to 100 m. These Active Optical Cables utilize multimode fiber using a nominal wavelength of 850nm. The electrical interface uses a 38-contact edge type connector. Eoptolink is producing QSFP+ to QSFP+ AOC and QSFP+ to FOUR SFP+ AOC.
1 / 1
40G QSFP+ AOC
- Full Duplex 4 Channel 850nm Parallel Active Optical Cable
- Supports transmission rates up to 14 Gbit/s per channel
- QSFP-based modules at each cable end
- QSFP interfaces fully compliant to SFF- 8436
- Hot pluggable electrical interfaces
- QSFP-based module supports Rx Pre-Emphasis
- EEPROM-based Serial-ID, accessible through two-wire Serial Interface
- Multi-channel 850nm VCSEL array
- Multi-channel PIN-detector array
- Helix type 8-fiber Multi-Mode Optical cable that allows for bending in any direction
- Low power QSFP module: 0.8 Watts (typ.) per end
- 0°C to +70°C operating case temperature
- Laser Class 1 IEC/CDRH compliant
| Part No. | Description | Data Rate | Wavelength | Distance | Connector | Temp. |
| EOLQ-8540G-PCT-XX* | AOC QSFP+ | 40G | 850nm | 1m to 100m | LC | C |
| EOLQ-8556G-PCT-XX* | AOC QSFP+ | 56G | 850nm | 1m to 60m | LC | C |
| EOLQ-8540G-PCT-XX-Y1 | AOC QSFP+ | 40G | 850nm | 1m to 100m | LC | C |
*Length measured OM3 fiber. XX denotes the AOC length with unit meter. For example, 01 denotes 1m, 02 denote 2m … 99 denote 99m and 1H denotes 100m
For the latest specification and samples, please, contact us This email address is being protected from spambots. You need JavaScript enabled to view it.
